AquaKing Alum Powder
This product is a floculant in powder form and is very effective in clearing cloudy or muddy water and removing suspended dead algae in a swimming pool.
NB: Only use AqauKing Alum Powder if the water contains large amounts of suspended matter.
Sufficient for swimming pools up to 90 000 litres:
Completely remove the APC (automatic pool cleaner) and adjust pH to above 7.8 before adding AquaKing Alum Powder.
Once pH is at the desired level, turn the filtration to Bypass or Circulate and disperse AquaKing Alum Powder over the surface of the pool.
Depending on the severity of the problem, 2kg AquaKing Alum Powder is sufficient for swimming pools between 40 000 and 90 000 litres. Let the filtration system run for at least 3 hours after adding the relevant amount of AquaKing Alum Powder.
After the 3 hours, switch OFF the swimming pool's filtration system to allow the suspended matter to settle at the bottom of the pool. Then, within 24 hours, vacuum the debris from the swimming pool, with the filtration system set to waste.
Correct pH back to the desired level of between 7.2 and 7.6 and return the filter's multi-port to Filter or Filtration.
NB: When ordering –
Product Codes are linked geographically per Hyper Pool or Riaan Pool distribution centres, as follows –
(B) = Hyper Pools – All branches in Bloemfontein, Welkom and Bethlehem.
(E) = Riaan Pools – Edenvale.
(V) = Riaan Pools – CBD, Junxion and Three Rivers.